See more Shower head kits
Triton 5-spray pattern Chrome effect Shower riser rail kit
Suitable for both electric and mixer showers, this silver classic shower kit from Triton has a chrome effect finish, and comes with aluminium riser rail, soap dish, shower head and 1.25m shower hose. It comes with fixings supplied, for easy and quick installation.
- Assembly required
- Included: Comes with aluminium riser rail, soap dish, shower head and 1m shower hose
Features and benefits
Suitable for electric, mixer and power showers, this shower kit from Triton has a chrome effect finish, and comes with aluminium riser rail, soap dish, shower head and 1m shower hose. For easy installation, it comes with fixings supplied.
- Suitable for electric, mixer or power shower systems
- 1m double interlocking chrome hose
- Shower head features Dura-Flow™ - a removable ‘push and twist’ spray plate to clean those hard to reach places
- Rub clean shower head - 5 spray patterns
|Product type||Shower riser rail kit|
|Shower head spray patterns||5-spray pattern|
|Shower head width||150mm|
|Shower rail height||1150mm|
Very modern design
KC363 - 1 year ago
I bought this product to replace my old corroded shower riser, water had got into the lower bracket. Although it was not the same size it was easy to assemble and fit. Looks great and is very good value for money.
RobertRobert - 2 years ago
Easy enough to fit, fitted to a bath mixer, not a bad fitting. I am 6 foot tall and due to an over sight on my part I ended up useing my old hose, the hose with this kit is rather small. Will not reach from a bath mixer to the head on anyone graduated from nursery school.
Good looking Shower kit but has short hose
ChrisD22 - 2 years ago
Installation of this shower was straight forward, but inserting the plastic covers on the screw mounts was a bit tricky. I had to very gently tap the covers with a hammer to get the tabs to clip home. The hose is too short as I cannot stand under the shower head. I am less than 6ft tall, so someone above 6ft should look elsewhere.
Shower head doesn’t tilt
Mrs XY - 3 years ago
Unfortunately, we don’t have a 3 metre shower so a shower head that can’t be adjusted is no good.
OK just product
Pat the Plumber - 3 years ago
Just bought and fitted this as a replacement for a mira. Needed to drill extra holes in the brackets as the pre drilled ones did not fit existing holes as the riser is not expandable. Found that one hole at each end was enough to give it a firm fixing. As mentioned by others the covers for the brackets took a lot of effort to get them to click back in. Others have mentioned the fact that the shower head was not adjustable so can only assume that triton have fixed the problem as mine certainly is easily adjustable up and down etc. otherwise it would be going back.Used the old round head screws instead of those supplied as it provides a much more secure fixing. Different sprays easy to adjust so rather pleased with that aspect so far. Although it is all plastic it does look quite smart once you get over the fitting problems.