See more Paint


Right chevron


Right chevron
Left chevron
Valspar Classic Walls & Ceilings Interior Silk Emulsion, Base A, 2.5L Almond Milk W6e
Right chevron

Valspar Classic Walls & Ceilings Interior Silk Emulsion, Base A, 2.5L Almond Milk W6e

Sold & shipped by B&Q

per l

Size option

Previous arrow
Checking availability...

Product details

Product information

    Valspar Classic gives great coverage in true HD colour, making your room look and feel spacious and bright. This water-based formula is quick drying and low spatter making it both easy to use. Scrubbable and resistant to common household stains, Valspar Classic endures the scuffs and knocks of daily living without compromising your colour or finish, keeping the walls and ceilings throughout your home looking great for longer. With Valspar® you can have any colour, no compromise.

    • Suitable for Drywall & plasterboard
    • Stain resistant
    • Scrubbable
    • Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
    • Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
    • Statutory guarantee

    Features and benefits

    • Scrubbable
    • Great Coverage
    • Water-based
    • 2.2 million colours
    • This product has a Valspar Love Your Colour Guarantee
    • We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.
    • We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.


    Application methodBrush, roller or spray
    Drying time7 days
    Instructions for storageDon't allow to freeze
    Maximum application temperature25°C
    Minimum application temperature10°C
    Minimum touch dry time1h
    Number of coats2
    Paint base densityLight base
    Recoat time2-4 hours
    VOC levelMinimal
    Product code5055018186104