See more Paint


Right chevron


Right chevron
Left chevron
Valspar Premium Walls & Ceilings Pure Brilliant White Matt Emulsion paint, 5L
Right chevron

Valspar Premium Walls & Ceilings Pure Brilliant White Matt Emulsion paint, 5L

Sold & shipped by B&Q

per l

Size option

Previous arrow
Checking availability...

Product details

Product information

    Valspar® Premium Walls & Ceilings with Life-Kind™ technology is highly stain resistant and scrubbable, so it can withstand even the toughest household stains - making it perfect for busy homes. It gives fantastic coverage in true HD colour, and the water-based formula is quick drying and low spatter, making it both easy to use and to clean up. Valspar gives long-term performance you can rely on, your colour will stay true for years to come.

    • Guarantee - Statutory
    • Suitable for use on Wall & ceilings
    • Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
    • Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
    • Instructions for Storage - Protect from frost

    Features and benefits

    • Life-Kind™
    • Excellent Scrubbability
    • Fantastic Coverage
    • Ultra-low VOC
    • Water-based

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.


    Application methodBrush, roller or spray
    ColourPure Brilliant White
    Drying time1 h
    Maximum application temperature25°C
    Minimum application temperature10°C
    Number of coats2
    Quick dryQuick dry
    Recoat time4 hours
    VOC levelTrace
    Product code5055018187644