See more Paint


Right chevron


Right chevron
Left chevron
Valspar Simplicity Walls & Ceilings Pure Brilliant White Matt Emulsion paint, 10L
Right chevron

Valspar Simplicity Walls & Ceilings Pure Brilliant White Matt Emulsion paint, 10L

Sold & shipped by B&Q

per l

Size option

Previous arrow
Checking availability...

Product details

Product information

    Valspar® Simplicity Walls & Ceilings is a low splatter, quick drying paint with a smooth finish, giving a great, even coverage. It’s also lightweight meaning you can achieve your new look with minimal effort, whilst being wipeable and easy to maintain. Valspar Simplicity’s water-based formula means it’s also easy to use and to clean up, so you can spend more time enjoying your transformation.

    • Guarantee - Statutory
    • Suitable for use on Wall & ceilings
    • Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
    • Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
    • Instructions for Storage - Protect from frost

    Features and benefits

    • Lightweight
    • Easy-to-use
    • Wipeable Formula
    • Stunningly Simple

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.


    Application methodBrush, roller or spray
    ColourPure Brilliant White
    Drying time2 h
    Maximum application temperature25°C
    Minimum application temperature10°C
    Number of coats2
    Quick dryQuick dry
    Recoat time2-4 hours
    VOC levelTrace
    Product code5055018187682