See more Paint


Right chevron


Right chevron
Left chevron
Valspar Trade Contract Pure Brilliant White Matt Emulsion paint, 10L
Right chevron

Valspar Trade Contract Pure Brilliant White Matt Emulsion paint, 10L

Sold & shipped by B&Q

per l
Checking availability...

Product details

Product information

    This wall & ceiling paint is suitable for and covers 100m² per litre on average.

    • Guarantee - Statutory
    • Suitable for use on Wall & ceilings
    • Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when temperature of the surface being painted is above 10 °C. You can dilute this paint with water to use as a first coat on new plaster. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting.
    • Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.
    • Instructions for Storage - Protect from frost

    Features and benefits

    • High opacity, meaning fewer coats are required for optimal coverage and finish
    • Ideal for new plaster
    • No splatter
    • Low odour
    • For interior walls & ceilings
    • Suitable for a brush, roller or sprayer
    • Water based formula
    • Up to 16m² per Litre
    • Minimal VOC

    Legal Information

    • Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.


    BrandValspar Trade
    Application methodBrush, roller or spray
    ColourPure Brilliant White
    Container typeTub
    Drying time2-4 h
    Maximum application temperature25°C
    Minimum application temperature10°C
    Number of coats2
    Quick dryQuick dry
    Recoat time2-4 hours
    VOC levelMinimal
    Product code5055018165536