See more Paint


Right chevron


Right chevron
Left chevron
Valspar Trade Exterior Direct to Wood & Metal Pure Brilliant White Gloss Paint, 2.5L Tin
Right chevron

Valspar Trade Exterior Direct to Wood & Metal Pure Brilliant White Gloss Paint, 2.5L Tin

Sold & shipped by B&Q

per l
Checking availability...

Product details

Product information

    This gloss paint from the Valspar Trade Exterior Direct to Wood & Metal range is the perfect choice to update your home. Made to provide a rich, durable finish, you can be sure that this paint will look brilliant for longer. Pure Brilliant White is a stunning shade of white that will add a contemporary feel to your design. It can be applied on any metal and wood surfaces to create a consistent finish. After application, this paint will achieve a perfectly gloss surface that will look brand new for a long time. This 2.5L size will cover up to 30 m² on average, so you can buy exactly what you need to complete your decorating job. To achieve optimal results, it is important to start with a clean, dry, and dust-free surface. You can use a brush, roller or spray to apply an even layer. It will dry quickly between coats meaning you can recoat it in 2-4 hours. This paint offers top quality protection, designed to be resistant to rust, ultraviolet, water, and cracking, making it an ideal choice to use on surfaces outdoors. Also, you can be assured that this water-based paint is safe for you in your home, as it has minimal VOCs.

    • Guarantee - Statutory
    • Suitable for Metal & wood
    • Water resistant
    • Resistant to rust
    • Surface Preparation - Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. The surface must be clean, dry and free of dust and grease. Remove any loose rust.
    • Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. If applying to previously painted wood or metal, lightly sand with 240grit sandpaper. Apply 2–3 coats using a suitable brush, roller or sprayer. If spraying, dilute with 10% water. We recommend 3 coats for rusty metal. Avoid excessive brushing. Do not thin this product if applying with a brush or roller. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats. Can be used on exterior metals; cast iron, galvanised steel, aluminium and stainless steel
    • Guarantee - Statutory

    Features and benefits

    • No primer needed
    • Showerproof in 30 minutes
    • Can be applied directly to rust
    • Quick Drying
    • Water-based
    • Low VOC
    • Can be used on multiple wood & metal substrates

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.


    BrandValspar Trade
    Application methodBrush, roller or spray
    ColourPure Brilliant White
    Colour groupWhite
    Container typeTin
    Drying time2-4 h
    DurabilityHeavy duty
    Paint typeTopcoat
    Recoat time2-4 hours
    VOC levelLow
    Product code5055018190118