Skip to content

Valspar Trade Pure Brilliant White Silk Wall & ceiling Emulsion paint, 10L

Sold & shipped by B&Q
£70£7 per l
How much will I need?

Product details

Product information

Valspar® Trade Tough is a superior emulsion with advanced water-based technology, making it quick drying and low splatter, so it's easy to use and to clean up afterwards. The formula is stain resistant and scrubbable formula, giving the paint long-term performance and preventing stains from setting into the surface. Also, Valspar® Trade Tough has high opacity and superior covering power, ensuring excellent application.

  • Guarantee - Statutory
  • Suitable for use on Wall & ceilings
  • Surface Preparation - Apply when the temperature of the surface being painted is above 10°C. New plaster and other bare, absorbent surfaces must be sealed prior to painting. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting.
  • Instructions for Use - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. New plaster and other bare, absorbent surfaces must be sealed prior to painting. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting. Stir well before use to ensure paint is thoroughly mixed. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge giving you a levelled finish. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.
  • Instructions for Storage - Protect from frost

Features and benefits

  • ISO 11998 Class 1 rated
  • Sprayable
  • Minimal VOC

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Specifications

BrandValspar Trade
Application methodBrush, roller or spray
BaseWater-based
ColourPure Brilliant White
Container typeTub
Coverage170m²
Drying time2-4 h
Maximum application temperature25°C
Minimum application temperature10°C
Number of coats2
Quick dryQuick dry
Recoat time2-4 hours
VOC levelMinimal
Volume10000ml
WashableScrubbable
Product code5055018189792
Safety Information
Manufacturer / EU responsible person
Reviews
1 / 5(3 reviews)

J76 - 1 / 5 - 05/09/2023

Avoid

I bought the classic pure brilliant white and it dried a very light grey. Very disappointing, as I have used Valspar in the past. At the prices charged I can’t risk using Valspar again. Avoid.

- 1 / 5 - 22/01/2023

Avoid

This paint is the worst I've used. Took 4 coats to cover a light grey.

Linaz0191 - 1 / 5 - 22/09/2022

Please don't waste your money or time

Worst paint ever waste of good money can't belive the price it has really bad coverage