Varilight Grey profile Single 2 way Screwless Dimmer switch
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
Flat screwless profile dimmer switch with matt satin slate grey finish. 1 gang internal switch, ideal for controlling 1 circuit. 2 way switches make it possible to control the same light from 2 locations.
- Location: Internal use
- Push on/off with rotary dimming
- Is not suitable for wirewound transformers and fans
Features and benefits
- Leading edge dimmers are compatible with inductive loads such as magnetic low voltage transformers and have a relatively high minimum load operating a TRIAC switch to control power
- Low profile, screwless faceplates featuring polished chrome rockers for a sleek, contemporary style
- Concealed fixings
- 1 year Guarantee
- For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.
Specifications
| Brand | Varilight |
|---|---|
| Model name/number | TDRP401S |
| Colour | Slate grey |
| Pack quantity | 1 |
| Number of ways | 2 |
| Screwed/screwless | Screwless |
| Number of gangs | 1 |
| Product code | 5021575880083 |
Reviews
1.5 / 5(2 reviews)PINHIGH - 2 / 5 - 03/11/2015
great looking switch...but ,,,
this is in my opinion a great looking sleek modern switch which blends well with our chosen colour scheme , however the design of the clip on front cover is TERRIBLE making it very difficult to fit, whilst keeping it flush to the wall. In the end we ended up having to glue the two pieces to ensure a firm fit. just to add I am an experienced DIY person and even couldn't fit this properly after enlisting the help of a friend who has over 30years in the building trade. sadly in spite of good looks I wouldn't but this design again
PJB48 - 1 / 5 - 15/12/2014
Poor Quality
The dimmer itself seems adequate but the faceplate would not clip onto the main body securely. In the end I had to use some glue to hold it in place, which seems to work for now but will cause problems when I want to remove it.