White Silicone-based General-purpose Sealant, 300ml

• Guarantee - Statutory
• For General-purpose
• Included: Includes 1 standard cartridge and 1 nozzle
• Safety Information - Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
• Instructions for Storage - Store in dry conditions between +5°C and +25°C.
• Instructions for Use - Completely remove any existing sealant and residue. Then, thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove the nozzle cap and trim the nozzle diagonally to fit the joint width. Screw the nozzle into the cartridge and insert the cartridge into a cartridge gun. Pull the trigger to apply sealant into the joint and ensure that the sealant has good contact with both sides of the joint. Then smoothen the sealant with a sealant finishing tool within 5 minutes. It is recommended to use this in a well-ventilated area

Features and benefits

• Mould resistant and waterproof
• Note: the Helpline telephone number relating to DIY.com shown on this product is incorrect. Please dial 0333 014 3098 for all Helpline enquiries