See more Shelf supports
White Steel Shelving bracket (H)100mm (D)75mm
Sold & shipped by B&Q
£
3
Checking availability...
Product details
Product information
- Compatible with 75 to 150mm shelves
- Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets
- Fixings sold separately
Features and benefits
The basic bracket to support all your shelving projects
- Resistant: The epoxy finish prevents rust and ensures a long-lasting colour
- The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly
Specifications
| Product type | Shelving bracket |
|---|---|
| Pack quantity | 1 |
| Product height | 100mm |
| Product weight | 25.5g |
| Product width | 31.8mm |
| Material | Steel |
| Maximum load | 10kg |
| Model name/number | OPP1 |
| Colour | White |
| Product code | 3663602764496 |