See more Paint


Right chevron


Right chevron
Left chevron
Zinsser PermaWhite Matt Interior Anti-mould paint, 2.5L
Right chevron

Zinsser PermaWhite Matt Interior Anti-mould paint, 2.5L

Sold & shipped by B&Q

per l
Checking availability...

Product details

Product information

    PermaWhite® White Interior Matt is a mould resistant interior paint, containing a biocode that protects the dried coating against fungal degradation. The paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance. PermaWhite® bonds to existing solvent-based or glossy paints and can also seal new drywall, cement block and concrete. A scrubbable, matt finish recommended for any area of persistent high humidity, frequent temperature changes and poor air circulation - ideal for bathrooms and laundry rooms.

    • Guarantee - Statutory
    • Suitable for use on Brick, concrete, existing paintwork, plaster, plasterboard, masonry & wallpapers
    • Surface Preparation - Surfaces must be clean, dry, sound and free of dirt, dust, grease, wax, wallcovering adhesive, loose paint or other surface contamination. Ensure surfaces are completely dry before painting and remove all existing mould and mildew. Stains: Rust, tannin, grease, mould and mildew and other stains should be blocked with the appropriate Zinsser® stain killing primer-sealer such as Zinsser B-I-N® or Zinsser B-I-N® Aqua.
    • Instructions for Use - Shake or stir well before using. Apply with synthetic bristle brush, roller, pad applicator or sprayer. For airless spraying, use a .017 tip and high medium (2000-2600 PSI) pressure. Apply when air and surface temperatures are between 10°and 32°C and humidity is less than 80%. PermaWhite® is designed to be used as is. If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume.

    Features and benefits

    • Water-based, low odour
    • Fade Resistant
    • Self-priming – sticks to surface without sanding
    • Gives a washable, scrubbable, stain and moisture resistant finish
    • Scrubbable – Class 1 Wet Scrub Rating (ISO 11998)

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.


    Application methodBrush, roller or spray
    Container typeTin
    Drying time7 days
    Minimum touch dry time0.5h
    Number of coats2
    Paint typeTopcoat
    Recoat time2 hours
    RGB value255,255,255
    Room useAny room
    VOC levelMinimal
    WashableWashable, wipeable, scuff & stain resistant
    Product code5037898610382