13" to 22" Dual Twin Vertical Monitor Desk Stand TV Office Tilt Table Mount Bracket

Dual Display Desk Stand - For two monitors or TVs from 13" to 22"Why Buy? - Dual displays have been proved to increase efficiency when performing certain tasks on a computer, therefore making them economically viable. This dual desk stand is also used in shops when one screen is pointed at the customer and one at sales person. Colour - Grey/Silver

Made from? - Predominantly made from powder coated steel, making this stand extremely strong. Monitor Weight Limit - 10KG EachMounting - A desk attachment is provided (as pictured on the left) allowing you to mount the stand on a desk. This is very simple to install and just requires the clamps tightening up. Instructions are provided, it can be used with desks that are up to 90mm thick.Fixings -

Fixings are supplied for attaching your monitor or TV

to the desk stand and instructions on how to do this are also included,

making

the installation process very easy.Tilt, Swivel and Rotation - 0-180 degrees tilt, 0-360 degrees swivel and 360 degrees rotation allowing your screen to be horizontally or vertically aligned. All this is illustrated on the diagrams at the top of the page. The pivot points are tensioned and hold the screen in place very firmly. Will both my screens fit side by side? - The pole is 700mm from its base. If you wish to mount your screens on the same side of the pole, they would have to be less than 440mm each. Depending on whether your screens are mouted horiztonally or vertically (they can be rotated), a different measurement of your screen would have to be taken.Arm Length - Your screen will sit 110mm away from the pole.Quick Release System - There is a quick release system for easy height adjustment. VESA Hole Patterns - 75 and 100What is VESA? - In short, VESA is a hole pattern standard that appears on the back of displays which the majority of large manufacturers have agreed to adhere to. Our stand supports VESA standards. To check if your monitor is compatible simply measure the distance betwee