2x Right Angled TV Aerial Male Connector 90 Degree RF Coaxial Plug Adapter

Quantity of 22 x Right Angle Male Aerial Connector

A high quality 90 degree connector for connecting to coaxial aerial lead

Compatible with Digital or AnalogueAccepts RG-6 Cable (up to 6.4mm outer diameter)PAL – TypeRoHS CompliantEasy fittingStrain reduction

Usage – Ideal for wall-mounted LCD and Plasma screens that sit very close to the wall. This connector allows an aerial cable to exit the rear of your TV pointing downward, rather than horizontally from the back. This prevents sharp bends in the cable that could increase wear, shorten its lifespan or create a poor quality signal.

Construction – All metal construction ensures long-term use and optimal conductivity. Compatible with all PAL televisions using RG-6 coaxial aerial cable carrying digital or analogue signals. The connector is also manufactured to RoHS standards to guarantee the safe and responsible handling of any hazardous materials used in its construction.

Installlation – Unscrew the threaded section with the hexagonal outer profile and slip the sleeve over the end of your aerial cable. Strip your aerial cable, insert the central conductor on the aerial cable into the internal pin hole with a grub screw (as seen on the bottom right picture). Ensure the outer shield is touching the connector and a high quality signal with be achieved. Re-tighten the threaded collar.How to use - The outer shell of the connector can be unscrewed where there is an internal pin with a grub screw built in, this allows you to attach the centre core of your cable. When the outer shell of the connector is screwed back into position, it clamps down and the cable earth providing a good connection.