32" to 65" Full Motion Curved TV Wall Bracket Cantilever Tilting Screen Mount

Full

Motion TV Bracket for Mounting Curved & Flat TV Screens

Overview:

This full

motion TV Wall Bracket is suitable for any type of flat or curved TV screen

that is sized between 32” – 65” and fit within the hole spacing of the bracket

(see below). It has a tilt range of -2° to 12° either upwards or downwards. It

can also be brought forward to a 90° pan from the wall plate, allowing it to be

easily brought forward away from the wall. This allows you to freely adjust the

angle of your TV to best suit your viewing needs. When the bracket is closest to the wall there

will be a distance of 74mm from the TV to the wall. When fully extended, there will be a distance

of 514mm from the wall. This full motion Bracket has a 45° swivel allowing your

TV to be viewed even when mounted in a corner of the room.

This TV

bracket can be easily mounted to a wall with the provided fixings, an

instruction manual is also included. TV fixing screws are also provided in the

following sizes 4 x M4 25mm, 4 x M5 25mm, 4 x M6 25mm, 4 x M8 25mm.

Cable Management System –Any cables can run through the bracket, improving safety and tidiness.

Dimensions:

Wall

Plate Dimensions – 477mm x 394mm

Bracket dimensions – 648mm x 440mm

Weight:

Bracket

Weight – 7.35kg

Max. Weight Load – 45kg

Max. VESA – 600mm

x 400mm

What is VESA? VESA is

a hole pattern standard appearing on the back of display screens, allowing them

to be mounted to brackets and stands such as this one. To check if your monitor

is compatible simply measure the distance between the holes on the back of your

display.