See more Easy Fit Door Sets
4 Panel Pre-painted White Unglazed Internal Door kit, For opening sizes (W)683-695mm (H)1988-1996mm (D)35mm
The Easy Fit door set is a door and frame, already cut and routered for hinges and latch, ensuring it is easy to fit with no joinery expertise or specialist tools. The hinges, latch and latch plate are included so all you need to do is fix it into the door opening and add a handle. You can replace your existing door quickly and easily, just measure your existing opening to determine which size you require.
- Save time and money and avoid the expense of hiring a joiner
- Pre-painted white - no further decoration required
- Door, frame kit, hinges & latch plate supplied - handles not included
Features and Benefits
The Easy Fit door range is an interior door system so simple anyone can fit in minutes without being an expert, or the need of a joiner. Suitable for most standard sized door openings.
- This door can be hung left or right handed so you choose which way it opens
- For opening sizes of (W)683-695mm x (H)1988-1996mm x (D)35mm
- To give you the flexibility to choose the style and finish you want, our doors are sold without handles
- Easy lift off hinges to swap or remove doors easily
- Includes door and frame kit, hinges, latch and latch plate - all you need are the handles
- Made from responsibly sourced, Forest Friendly timber
- This product is to be installed within an existing door frame, and is not suitable for new apertures
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Timber approval||FSC® approved|
|Comes with||Door, frame kit, hinges & latch plate supplied - handles not included|
|Fitting||This door can be hung left or right handed so you choose which way it opens|
You'll need a joiner ...
Steve0129 - 1 year ago
I bought four as I thought it would be easy as advertised. I'll be taking three back.
The idea of easy fit/no joiner needed sounded great, but in reality even with my modicom of woodworking skills it took a lot of extra work.
The kit didn't come with a top bar, only the two side lengths so I had to find timber to place at the top of the frame. The side frames were not timber but plastic coated mdf.
I live in a 1960s, 'not a right angle in sight' kind of house so was expecting to use the frame packers provided - and I did, all of them ... AND extra bits of strip wood I could find.
I wish I had bought normal door and hung it myself - a lot less bother and probably cheaper.
I expect this kit would be perfect for a newer house - just like the advertising video.
soup22 - 2 years ago
I bought one of these doors this afternoon. I wanted a right hand opener but none were available so I bought the dual type that can be fitted right or left hand opener. On unpacking the door I found the side rails that all the fittings go on were chipped and marked so I returned to the store and exchanged them. The side rails have cut outs on both sides for the fittings and you place the fittings in the cut out depending on which side you want the door to be opened.. Bizarrely if you use the side of the rail for a right hand opener you will find a strip clearly visible when the door is opened where the laminate join has been stuck down - it looks like an acccidental paint strip down the rail. If you are using the rail for the left hand opener there is no strip on that side and therefore you get a neat looking finish. The other problem is that all the rails and door stops only cover some of the door surround so you still need to paint parts of the existing surround of the doorway. In principle this is a good idea but if you want good looking professional doors get a professional fitter in and buy better doors .
Does the job
Anonymous - 2 years ago
Bought this for bathroom and after a bit of fettling, managed to fit it without needing a joiner. Decent quality for internal doors. Not overly robust but certainly worth it.
good door. bad packing bits misssing
merrywidow - 2 years ago
the kit itself is a great idea but my kit had 2 latch side frame strips and a missing hinge side strip. if also had a missing latch. but after a phone or 2 these were sent. easy instructions and saves a awful lot of time with a chisel. would buy it again
Easyfit - It Was!!
Jackie272 - 2 years ago
I hasve never attempted to fit a door before so thought I would try this. Just brilliant. With a few basic tools I fitted it in around 30 minutes and most of that was final adjustment. It is fully painted too so once it was in that was it