5000ML Lanolin Vehicler Chassis & Underbody Care

• Suitable for Glass, metal & wood
• Suitable surface: Multi-surface
• Remove loose dirt / mud/ rust. Dry, or use Buzzweld Splash.
• Guarantee - Statutory

Features and benefits

Chassis Guard Lanolin Oil Underbody 5000ML Tin

Benefits of Chassis Guard

6>12 month protection prior to topup

Great for topping up existing treatments new and old

High penetration into existing corrosion

Hydrophobic to shed water and minimise latent moisture build up

Easy to remove, Non Toxic and Biodegradeable

Ultra Low VOC, and absolutely minimised harmful emissions during curing

Clear so you visually inspect the substrate

Superb as a wood treatment / preservative

Plant based. Not petro chemical based*

Safe on rubber and plastics

anti- corrosive

Re clarifies headlights

Restores deep colour on paints, especially bedliners

Great as a cavity treatment with great rust penetration and creep

Drives heavy corrosion from the base steel over time

Superb patina preserver

How to use Chassis Guard

Remove any mud

Heavier corrosion can be removed to increase product penetration, or can be left and topped up later on be aware that large lumps of rust (delamination) can come off and not be fully penetrated. If you treat a vehicle with lumps of rust, ensure you inspect and topup more often whilst the corrosion is driven off the base metal by Chassis Guard over time.

3>6 month protection apply one heavier coat and fully seal the surface.

6>12 month protection, apply one full covering coat, and leave for 48 hours or more. Then apply a full second "heavy" coat. protect from getting wet, and allow to become touch dry prior to use

Application / mixing of Chassis Guard

Brush / roller use as is

HVLP use a 1.8>2.5mm tip. generally does not need thinning. can be warmed rather than thinned. Use up to 5% white spirit or our 1K multi-thinner if not flowing well.

Hand / Pressurised sprayers- thin 10>15% using white spirit, or our 1K multi-thinner.

Schutz / wax oil guns use neat for external spraying, thin to suit for cavities (i would start around 20% white spirit or our 1K multi-thinner if not flowing well.)

• High penetration into existing corrosion
• Non Toxic
• Fully Biodegradeable
• Plant based. Not petro chemical based*
• Safe on rubber and plastics
• 6>12 month protection prior to topup
• Great for topping up existing treatments new and old
• Hydrophobic to shed water and minimise latent moisture build up