See more Door knobs

Home

Right chevron

Hardware

Right chevron

Handles & knobs

Right chevron

Door knobs

Right chevron
Zoom inZoom outZoom reset
Beech effect Wood Round Door knob (Dia)56.55mm, Pair

Beech effect Wood Round Door knob (Dia)56.55mm, Pair

£15
Loading
Checking availability...
Loading
Checking availability...

Product details

Product information

  • Compatible with Compatible with doors between 35-44mm thick
  • Only fixings included
  • Comes with 1 Sets door knob , 1x spindle and fixing screws

Features and benefits

  • Great for internal doors
  • This beech effect mortice knob adds an attractive finish to your home.
  • Easy to install

Specifications

Product typeDoor knob
Pack quantity1
LocationInternal
MaterialWood
Model name/numberCKNH11 BEE
EffectBeech effect
Product shapeRound
Spindle length47.3mm
Product height57.4mm
StandardBS EN-1906
Product width57.4mm
Product code03414040

Reviews

Full star
Empty star
Empty star
Empty star
Empty star
1.16 / 5(6 reviews)

Fitting is a joke

Full star
Empty star
Empty star
Empty star
Empty star

Nealsing - 6 months ago

Unfortunately, I bought 2 sets of these knobs before I read the reviews. I wholeheartedly agree with the comments regarding the use of too short wood screws to be fixed into a steel bar. I challenge the manufacturer to fit a pair of these knobs with the materials supplied. As one of the other reviewers commented, it is possible to fix these knobs if you have a supply of other bits and pieces, the supplied parts are NOT up to the job.
B&Q, you need to get your product quality assessment up to scratch.

Fitting is NOT easy!

Full star
Full star
Empty star
Empty star
Empty star

Anonymous - 6 months ago

Thinking that fitting these door knobs (to replace some chewed by our dog) would be a ten-minute job, proved to be a long way from fact. There are 2 things wrong with the kit. First, the metal washers which should fit inside the knobs (around the spindle) do NOT fit into the knobs. Second, the spindle screws (described as "short") are much too short to reach the spindle. Luckily, being a bit of a hoarder, I had other screws which were long enough, otherwise I would have had to waste another 45 minutes going back to my local B&Q store to complain.

Dreadful. Do not buy

Full star
Empty star
Empty star
Empty star
Empty star

Gillyp63 - 6 months ago

The screws do not bite as they are the wrong type and the wrong length. The metal washers are too small to fit the handle. The components do not fit each other, the instructions are minimal and unhelpful. The only way to fit it is as a bodge job, providing your own screws

Needs a bigger screw and modification

Full star
Empty star
Empty star
Empty star
Empty star

Notajoiner99 - 1 year ago

Reading the instructions on the bottom of the box will make you think this is simple and easy to do. Not so.
As the other reviews have said the small brass wood screw is totally ineffective at securing the handle to the metal spindle. For a start it is a size 6 at least and so short it does not make any purchase into the slot on the spindle.
You need to drill a 2mm hole into the slot where the handle will sit. This then needs opening out to 2.5mm. It is easy doing it my way. (Pilot hole first.)
Then use the aluminium self tapping screw which is long enough to get into the slot to secure the handle to the spindle. I did not use the self tapping screws to secure the roses to the door.

utter rubbish do NOT BUY THESE

Full star
Empty star
Empty star
Empty star
Empty star

Anonymous - 1 year ago

just bought these and they utter rubbish , do NOT buy these you cannot connect the handle to the bar , tiny wood screw to try and fix into a hardened steel bar does not work ...absolute waste of money

  1. Show all customer reviewsRight chevron