See more Frost & water proofers


Right chevron

Building supplies

Right chevron

Cements & additives

Right chevron
Bonda G4 Pond Sealer - Clear 5kg

Bonda G4 Pond Sealer - Clear 5kg

Sold & shipped by Rustins Limited

Checking availability...

Product details

Product information

Seals porous cement rendered surfaces providing a tough but durable flexible coating. Can be applied at low temperatures down to 0c. Seals out lime. Pigmented.

  • Guarantee - Statutory
  • Apply by brush or roller. G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed. Any loose pointing in brick work should be replaced or worn areas in floors repaired. For most sealing purposes 3 coats are recommended. Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats. Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
  • Will store for many years if suitably stored unopened in original container. NOTE; this is a moisture-hardened product so storage life of opened tins is limited.
  • Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

Features and benefits

Durable deep bonding plastic coating for concrete without the need for a primer. May be applied at low temperatures. Forms a non-porous seal on rendered concrete, brick or porous stone.

  • Hard Wearing
  • Non-Porous
  • Suitable for application at high & low temperatures & good chemical resistance
  • Quick & Easy to apply
  • Used in conjuction with G4 Damp Seal for coloured finishes in pond and floor coating.

Legal Information

  • Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.


Minimum application temperature1°C
Maximum application temperature50°C
Recoat time15-30 minutes
Coverage per litre1.1m²/L
Number of pieces1
Product weight5000g
Drying time60-90 min
Product code5014197122266