See more Frost & water proofers
Britannia Paints Durashield Roof In A Box - All In One Roof Kit - 10 Year Life Expectancy
Sold & shipped by Britannia Paints LTD
Available online only and not stocked in B&Q stores
Product details
Product information
Developed specifically for refurbishment and overlay applications where greater life expectancy is needed. Cold applied so no hot works on roof – just one coat protects for up to 10 years. Flexible and highly elastic with excellent adhesion to almost any wall or roof substrate.
ALL IN ONE ROOF KIT - Durashield Roof In A Box contains everything you need to ensure you get the longest life possible out of our Durashield fully built up system. Box Contains: ✔ Durashield Grey 20 Litres. ✔ Durashield Fast Drying Primer 5 Litres. ✔ Reinforcing Scrim (0.75m x 20m). ✔ 15 Litre Scuttle. ✔ 2 Pairs of Nitrile Gloves. ✔ 3x 12" Solvent Resistant Roller Sleeves. ✔ 12" Roller Frame. ✔ Extension Pole.
LONG-LASTING PROTECTION - Developed specifically for refurbishment and overlay applications where greater life expectancy is needed. Durashield Roof In A Box flexible elastomeric system offers a 10-year life expectancy when using the fully built-up system.
SUITABLE FOR MOST SUBSTRATES - A flexible and highly elastic system with excellent adhesion on most surfaces such as flat roofs, weathered asphalt and bituminous surfaces, concrete, brickwork, fibreglass and grp, weathered plys, OSB/plywood, wooden substrates and EPDM.
INSTANT WATERPROOF PROTECTION -Our ready-to-use, cold-applied liquid rubber-based system instantly waterproofs the affected area, providing a long-lasting and easy-to-apply solution. Once opened Durashield can be resealed and used again.
- Guarantee - Statutory
- PREPARATION: Clear all areas of moss, lichen and debris by brushing or power washing and remove surface water and any contamination such as Oil or Grease. Allow to dry. Apply Britannia Fungicidal Wash to prevent further fungal/algal growth. APPLICATION: Stir well before use. Do not thin. The substrate and ambient temperature for the application of the system must be between 5°C – 30°C. To the dry and cleaned surface, apply a generous coat of Britannia Durashield FD Primer by brush or solvent resistant roller at a minimum spreading rate of 3-5m² per litre. After the Durashield FD Primer has dried. Embed the reinforcing scrim into the wet Durashield basecoat applied at a rate of 1m² per litre, whilst avoiding creasing. Adjacent lengths of the reinforcement must overlap by 50mm. Finish with a further coat of Durashield as a topcoat at a rate of 0.5m² per litre ensuring that the reinforcement scrim is completely encapsulated. Final drying time is up to 1.5 hours or overnight depending on temperature and conditions. For detailed application advice refer to the Product Datasheet.
Features and benefits
- 10 Year Life Expectancy
- Covers up to 10-12m²
- When Opened Can Be Resealed & Used Again
- Flexible Elastomeric System
Legal Information
- WARNING. Contains: HYDROCARBONS, C9, Aromatics; Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%). Flammable liquid and vapour. May cause respiratory irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Specifications
| Base | Solvent-based |
|---|---|
| Coverage per litre | 1m²/L |
| Drying time | 2-6 h |
| Location | Exterior |
| Maximum application temperature | 30°C |
| Minimum application temperature | 5°C |
| Number of pieces | 10 |
| Product weight | 30000g |
| Setting time | 120min |
| VOC details | 499g/L |
| Product code | 5060952081552 |