Charnwood 3/4'' Floorstanding Morticer with Sliding Bed

Table Moves Through X and Y Axis

Cast Iron Body, For Strength & Stability

Cast Iron Table, Hard Wearing For A Long Life

Cast Iron Work Clamp with Quick Action Lock

Welded Cabinet Stand with Storage Space

Plunging Head Controlled by Gas Filled Spring

Quiet Induction Motor Delivers The Power

This floorstanding hollow chisel mortiser has a huge timber capacity of 8″ x 6″ and can cut to the full depth of the chisel.

Extensive use of cast iron gives the entire machine strength and solidity allowing larger sizes of chisels to be used without flexing. The down feed handle can be adjusted so that a comfortable starting position can always be found. When cutting mortices in smaller timber the head can be lowered, so that the starting point of the chisel is just above the timber, which speeds up cutting.

Supplied with, chuck key, mortice depth stop, handle return stop, Left and Right table stops, Length stop, 3/4″ chisel bush, adjustable rubber feet, cable and plug.

Charnwood W325 Specification

From Chisel Bush to Table 315mm (12″)

Maximum timber height with a 1/2″ Chisel 205mm (8″)

Maximum clamping width 145mm (6”)

Chisel capacity 1/4″ to 3/4″ (8mm to 18mm)

Vertical Chisel Stroke (1 Stroke / Total Travel) 110mm (6″) / 230mm (9”)

Accepts chisel shank size 3/4″

Optional chisel shank size (Requires optional bush) 13/16″

Table travel (left to right) 165mm (6.5”)

Table travel (front to back) 150mm (6”)

From Back Fence to Chisel Centre 0mm to 150mm

Length Stop Capacity 730mm (29″)

Motor (induction) 750w (1hp), 240v

Motor Speed 1400rpm

Dimensions (WxDxH) 820mm x 720mm x 1800mm

Weight 120kg

Assembly Time Required 20 Minutes (Needs 2 People)

Rating Trade

Product Warranty 5 Years

Chisels are not included. See Below for our range of trade quality chisel & bits.