CHARNWOOD BB16 BANDSAW BLADE 2240MM X 1/2" X 4TPI FOR W721, Made in UK

Designed for all types of wood cutting, including contours, our Premium bandsaw blades feature a spring tempered high carbon steel blade with induction re-hardened teeth to 62HRC, providing decreased production times, better surface finish, increased fatigue resistance and longer blade life.

Manufactured in Great Britain.

Ground teeth assure precision cutting, better finish and less kerf loss.

High carbon steel body hardened and tempered to 45 Rockwell C Hardness withstands greater cutting pressures and optimises fatigue strength.

Faster and more precise cuts.

Hardened teeth to 62HRC ensure longer life.

Teeth can be re-ground or re-shaped and re-set.

Lower cost per cut.

When we first tested these new blades we couldn’t believe the high cutting speed compared to a standard blade. Furthermore the high cutting speed was achieved without any compromise on the finish.

After longer testing it was noticeable that the cutting edge remained sharp long after standard ‘unground’ blades would have blunted.

Charnwood BB16 Specification

Blade Length: 2240mm (88-3/16″)

Blade Width: 13mm (1/2″)

Blade Thickness: 0.55mm (0.022″)

Teeth per Inch: 4

Tooth Pattern: Hook

Material: High Carbon Steel

Tooth Finish: Ground

Suitable for use with;

All types of wood including nail embedded wood.

Non-ferrous metals.

Plastic and Acrylic.

For use with Charnwood model B300, W721 & W720 or similar bandsaws.

Compatible bandsaw blade for use with Sealey SM1305

Compatible bandsaw blade for use with SIP 01548

Compatible bandsaw blade for use with Woodstar SB12

Compatible bandsaw blade for use with Fox F28-191

Compatible bandsaw blade for use with Draper BS315

Compatible bandsaw blade for use with Warco BS312

Compatible bandsaw blade for use with Metabo BAS317