CHARNWOOD BG6P 6" Bench Grinder & Woodturners Chisel Sharpening System

Looking for a low cost solution for sharpening your woodturning chisels? This package could be the answer. Our sharpening system consists of 4 different jigs which allow all types of HSS turning chisels to be sharpened, to make your lathe work a pleasure.

The package consists of Charnwood BG6 Bench Grinder & BGCS4 Woodturners Chisel Sharpening System

BG6: Bench Grinder with 6″ diameter wheels, can be used for all grinding, sharpening and shaping tasks around the workshop.

The white stone helps to prevent heat build up and is used for sharpening heat sensitive tools such as High Speed Steel (HSS).

The other end of the grinder is fitted with a coarse Aluminium Oxide grey stone for fast removal of material.

The grinder is driven by a smooth and quiet induction motor.

The universal sharpening system consists of 2 base clamps which are fitted underneath each wheel of the grinder allowing concurrent grinding set ups. The base clamp has a quick action lock to quickly change between different chisel types.

4 attachments can be fitted into either base clamps for sharpening particular types of chisels:

Long Support Arm – For Bowl Gouges & Roughing Gouges

Skew Jig Attachment – For Flat or Curved Skews & Scrapers

Fingernail Gouge Jig – For Fingernail Gouges & Spindle Gouges

Flat Platform – For Parting Tools, Straight Edge Skews & Bench Chisels

Charnwood BG6P Specification

Motor (Induction): 250w (0.3hp)

Max. Continuous Run Time: 30 minutes

No Load Speed: 2850rpm

Spindle Diameter: 12.7mm (1/2″)

Wheel Diameter: 150mm (6″)

Wheel Width Grey (Coarse): 20mm

Wheel Width White (Fine): 40mm

Wheel Grit Grey (Coarse): 36g

Wheel Grit White (Fine): 60g

Built-In Coolant Tray

Wheel Dressing Tool

Assembled Dimensions (WxDxH): 620mm x 740mm x 370mm

Rating: Hobby