The complete scroll saw package, Perfect for hobby, craft and model making.

Electronic Variable Speed

16″ Throat Capacity

Use Both Pin and Plain Ended Blades

Foot Pedal Control Switch

Quick Action Blade Tension

64 Piece Accessory Kit for Rotary Drive

A cast iron base provides stability and keeps vibration down to a minimum.

The aluminium work table has a tilting function from 90 to 45 degrees.

The scroll saw can cut up to a depth of 50mm in various materials. There is an adjustable height foot clamp to hold the work piece down against the table An air blower keeps dust away from pencil lines to ensure they remain visible when following a template. A transparent guard keeps the operator safe from contact with the moving parts.

The addition of the foot pedal switch will transform the way you work with the saw.

A battery powered LED light on a flexible shaft allows light to be positioned directly onto the cutting area.

There are 2 types of scroll saw blades available: Pin end and Plain end.

Pin ended blades are easier and quicker to install. With the benefit of the quick tension lever, a blade can be changed in a few seconds.

To assist there is an integral setting jig cast into the upper arm of the scroll saw. The jig ensures the clamps are set at the correct distance apart.

On the side of the saw is a storage compartment to keep spare blades and service tools safe & ready to use.

Charnwood SS16F Specification

Motor (DC Brush) 90w, 240v, 50hz

Blade Length 127mm (5″)

Throat Depth 405mm (16″)

Max. Depth of Cut @ 90 50mm

Max. Depth of cut @ 45 20mm

Variable Speed 550-1650 spm

Weight 14.5kg

Rating Hobby