Charnwood W325P 1'' Morticer & Chisels Package Deal

This floor standing hollow chisel mortiser has a huge timber capacity of 8″ x 6″ & can cut to the full depth of the chisel.

Extensive use of cast iron gives the entire machine strength and solidity allowing larger sizes of chisels to be used without flexing. The down feed handle can be adjusted so that a comfortable starting position can always be found.

When working with this machine the timber is held in place by a front clamp with a quick action lock^& two further cam lock clamps which hold the timber firmly down against the table, to prevent lifting when raising the chisel.

There are then two separate controls for moving the table. Firstly the operator winds the table forwards or back until the chisel is aligned with the back edge of the mortice. The second hand wheel is turned to move the table left or right until the chisel is positioned at one end of the mortice.

Supplied with, chuck key, mortice depth stop, handle return stop, Left and Right table stops, Length stop, 3/4″ chisel bush, adjustable rubber feet, cable and plug.

Charnwood W325 Specification

From Chisel Bush to Table 315mm (12″)

Maximum timber height with a 1/2″ Chisel 205mm (8″)

Maximum clamping width 145mm (6”)

Chisel capacity 1/4″ to 3/4″ (8mm to 18mm)v

Vertical Chisel Stroke (1 Stroke / Total Travel) 110mm (6″) / 230mm (9”)

Accepts chisel shank size 3/4″

Optional chisel shank size (Requires optional bush) 13/16″

Table travel (left to right) 165mm (6.5”)

Table travel (front to back) 150mm (6”)

From Back Fence to Chisel Centre 0mm to 150mm

Length Stop Capacity 730mm (29″)

Motor (induction) 750w (1hp), 240v

Motor Speed 1400rpm

Dimensions (WxDxH) 820mm x 720mm x 1800mm

Weight 120kg

Product Guarantee 5 Years

4 Piece Chisel Set – Included with this package

Our range of mortice chisels and bits are professional quality and have a 3/4″ diameter shank.