See more Planer thicknessers
CHARNWOOD W583 10" x 7" Cast Iron Planer Thicknesser
Sold & shipped by Charnwood Machinery
Available online only and not stocked in B&Q stores
Product details
Product information
A solid and well finished planer thicknesser for the busy workshop.
Precision Ground Cast Iron Beds
2hp Induction Motor
3 Blade Cutterblock for Superior Finish
10” Planing Capacity
10” x 7” Thicknessing Capacity
Rubber Coated Outfeed Roller
100mm diameter Dust Extraction Outlet
Precision ground cast iron beds & a long tilting fence which can be positioned at any point across the table make this machine a delight to use. The 3 blade cutterblock is powered by a 2hp induction motor & is capable of a cut upto 5mm deep in a single pass.
To gain better visibility & access for thicknessing both of the planing beds are hinged and swing out of the way without using any tools. A dust hood / cutter guard is then swung into position & the conversion to Thicknesser is complete.
The feed roller drive features a rubber outfeed roller, can be disengaged during planing operations to save motor power & general wear on the machine. Supplied with 3 blades, 100mm dust extraction outlet, 4 adjustable feet, 1.6m power cable & UK 3 pin plug.
Our planer thicknesser will run off any standard 13amp supply.
W583 Specification
Surfacing width 250mm (10″)
Length of surfacing tables 1085mm
Maximum depth of cut 5mm
Fence tilt 90 – 45 degrees
Table height 856mm
Thicknessing capacity 5-195mm (1/4″-7″)
Length of thicknessing table 600mm
Feed speed 5.5m/min
Maximum depth of cut 2.5mm
Cutterblock speed 4000rpm
Number of blades 3
Motor ( induction) 1500w (2hp)
Dimensions (WxDxH) 1100mm x 780mm x 1050mm
Weight 150kg
Rating Trade
Product Guarantee 5 Years
Min Door Opening:Width In Crate 50cm
Min Door Opening: Width Out of Crate 44cm
It is essential to use dust extraction, the extractor removes all the dust & chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the blades.
- Guarantee - 5 years
- Comes with Blade Setting Jig
- Corded
- 5mm
- 250mm
Features and benefits
- A solid and well finished planer thicknesser for the busy workshop.
- Precision ground cast iron beds and a long tilting fence which can be positioned at any point across the table make this machine a delight to use
- The 3 blade cutterblock is powered by a 2hp induction motor and is capable of a cut up to 5mm deep in a single pass.
- The feed roller drive, which features a rubber outfeed roller, can be disengaged during planing operations to save motor power and general wear on the machine.
- Supplied with 3 blades, 100mm dust extraction outlet, 4 adjustable feet, 1.6m power cable and UK 3 pin plug. Our planer thicknesser will run off any standard 13amp supply.
- Rubber Coated Outfeed Roller
- 100mm diameter Dust Extraction Outlet
- Swing Away Tables For Thicknessing Mode
Specifications
| Brand | Charnwood |
|---|---|
| Cable length (m) | 1.6m |
| Cooling method | Fan cooled |
| Dust extraction type | Dust extraction facility |
| Height (mm) | 1050mm |
| Length (mm) | 1100mm |
| Model name/number | W583 |
| Motor type | Induction |
| No load speed | 4000rpm |
| Overload protection | Overload & overcurrent protection |
| Pack quantity | 1 |
| Power voltage supply | 240V |
| Speed control | Fixed speed |
| Switch type | No volt release switch |
| Tool weight (corded) | 150kg |
| Wattage | 1500W |
| Width (mm) | 780mm |
| Product code | 5060281690340 |
