See more Flashing tape
CladTape. Cladding Batten Water and Moisture Rot Protection Tape. Non-Butyl. 50mm x 20mtr
Sold & shipped by Walther Strong & Co Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
What will your cladding look like in a few years’ time?
It’s not all about what it looks like on the outside, if you have a stunning cladding board its worth investing on the substructure. Walther Strong Clad Tape is a non-butyl self-sealing tape manufactured from a massively strong polymer acrylic adhesive, which gives the timber battens a completely waterproof and weatherproof seal. With a 25-year guarantee, Clad Tape ensures your battens last as long as your composite cladding boards.
Non-Butyl tapes are particularly suitable for this application as they are completely UV stable and keep their integrity for longer. This means that they have many advantages over both butyl and asphalt tapes. In addition to this, it is stable from -40C to +93C with no cracking, peeling or strength loss.
- Guarantee - 25 years
- Protection of Cladding Battens from moisture and water weathering
- Self-adhesive
- Single-sided
- Suitable for: Sealing
Features and benefits
Cladding can be expensive.
Protect the timber battens under the cladding to ensure that you dont have to re-do the same job again in less than 5 years!
- Approved replacement to EPDM [which is a rubber product, known to fail in the British weather]
- Bond guaranteed for 25 years plus
- Completely water-tight & weather proof. Giving you the peace of mind that your investment will last that long.
- Quick application and self-sealing
- UV-stable. No break down of the product or compromise in its performance when its in sunlight.
- Non-butyl, made of a unique acrylic material which is superior to alternative EPDM and Butyl equivalent materials.
- Appropriate for vapour barrier and breather membrane sealing
- Tape can be easily overlapped without added any significant height which could interfere with the deck board heights easy to slide boards along taped joists when installing
Specifications
| Brand | Walther Strong |
|---|---|
| Adhesive type | Permanent adhesive |
| Colour | Black |
| Easy tear | Easy tear |
| Electrically insulated | Not insulated |
| Instructions for use | How to apply Clad Tape It’s simple! – Clad Tape has been specifically designed to have a hassle-free application. With no liner like other traditional tapes, it takes seconds to apply a strip of Clad Tape down the face of every batten. The tape comes in 50MM & 65MM widths which acts as a perfect ‘cap’ (slightly overlapping the edge of the battens) rather than a ‘wrap’ – This prevents any moisture getting in and slowly causing rot and at the same time allows the timber to breathe. Clad Tape can be applied to the battens in advance to the cladding boards being fitted – It doesn’t deteriorate or affect the benefits and qualities of the tape. |
| Length (m) | 20m |
| Location | Exterior |
| Material | Acrylic |
| Pack quantity | 1 |
| Product weight | 325g |
| Product width | 50mm |
| Solvent-free | Solvent-free |
| Product code | 9507663535784 |
