See more Coving Planks & Corners
Colours Altamira Classic C profile Polystyrene Coving (L)2m (W)100mm, Pack of 6
- Adhesive required
Features and benefits
- Lightweight and easy to Install
- Smooth finish ready to paint
- Harmonise wall to ceiling
- Conceal settlement cracks
Mitred corners not 45 degrees!
Ash S - 20 days ago
Bought this to avoid having to mitre corners ourselves. The corners are so poorly cut, that there would be an inch gap at the bottom of the corner - a little more than 'don't worry about gaps, they can be filled afterwards'!! All corner pieces needed trimming down make a 45 degree angle defeating the point of pre-cut corners.
Buy a mitre box, fine saw and straight pieces, do them yourself.
Absolute rubbish very poor quality
Unhappy punter1000000 - 1 month ago
If you think this is a preformed corner be prepared for disappointment. I ordered these on click and collect and what I got was the pack were you find the mid point (good luck with that) and then cut at 90 degrees. Picture is misleading avoid like Corvid 19
Really easy to use, light weight and looks good
Dmac72 - 2 months ago
I only gave this product a 4 star review as previously stated about the mitred joints, however it was very easy to apply and only took a couple of hours to install.
Yes the mitred joints aren’t the best but when filled in and lightly sanded the results are excellent and This is the first time I’ve ever attempted anything like this.
My daughter’s room looks fantastic so bought more to do the whole upstairs! Don’t be put off by the negative reviews as any gaps are easily filled even on the mitred corner joints and once painted you can’t see any of the joins.
This product has transformed the look of the room and in my opinion is well worth the money..
Corners are NOT mitred correctly
tricia1967 - 3 months ago
we purchased these to save a little time messing about with the corners , however it would appear the manufacturer is unable to cut at 45 degree angles correctly and leaves a big gap. wouldnt bother with these at all,you'll get a closer fit cutting yourself.
The MDF pictured is completely square gap should not be there ,and translates to a significant gap on the ceiling.
Product not fit for the reason its being sold in the kit form , For the corners !!!
Goldenmongoose - 6 months ago
Have got to say these polystyrene coving's are pretty good compared to what they used to be like. If you have any joints on a straight run use a hot glue gun to stick them before fitting and you can barley see it.