See more Multi Surface Paint
Colours Black Gloss Metal & wood paint, 0.75L
Our stores do not stock this product
This Black gloss wood & metal paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush or roller and leave for 12 hours to dry - a great way to give the surfaces additional protection. Covers up to 11 m² per litre on average.
Features and benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application method||Brush or roller|
|Drying time||12 h|
|Location||Interior & exterior|
|Recoat time||12 hours|
|Resistant to dripping||Drip resistant|
Does what it says on the tin
Bob the builders son - 3 years ago
One of the better features of this paint is, it doesnt need stirring, unless i misread the tin.
I didnt stir it, it went on easily, it covered in one coat, although a second coat could make the job perfect.
Brushes cleaned easily with white spirit.
tripitakachris - 3 years ago
Firstly let me say that I am a retired paint and decorating contractor, having worked with government departments and the MOD for many years. I bought the black gloss paint to finish a relatively small wooden project for a client. I found the coverage to be reasonable, when applied to a good undercoat. However, the paint was quick to thin out if any attempt to cross coat to get a clean, no brush mark finish. I also found that whilst the paint dried fairly quickly to the touch, it actually took four days in a temperature controlled environment to completely cure.. I always shop at B&Q for my DIY/work needs, however this is the second time I have had a curing problem with B&Q branded paint.
Non drip? I don't think so!
Ellio - 3 years ago
This paint drips and runs even on a flat surface. It looks thick in the can but once you start applying it it's too thin to give good coverage. I used it to paint a shelving unit and all the edges are showing the white primer beneath. It says on the can 12 hours to dry but it takes days to dry. Shelves I painted took a week to dry enough to be able to touch without leaving marks. I expect paint to take a week or so to harden but you can't even touch this paint lightly after a few days! Will avoid this brand in future!
Drips and bubbles
Moaner - 4 years ago
Non-drip? No, it dripped, a lot. Tough and durable? No, 3 days later it is damaged just by pushing a finger against it. The finish is very poor with drips and runs and worst of all, bubbles that appear days later. Was still wet after 48 hours drying in moderate temperature low humidity conditions. Terrible.