See more Wood Furniture Paint & Treatments
Colours Black Satin Metal & wood paint, 0.75L
Our stores do not stock this product
This Black satin emulsion paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush or roller and leave for 4 hours to dry - a great way to give the surfaces additional protection. Covers up to 10 m² per litre on average.
- Suitable for Metal & wood
Features and benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- Control air pollutants by choosing products with lower solvent levels
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application method||Brush or roller|
|Drying time||4 h|
|Recoat time||4 hours|
|Minimum touch dry time||2h|
Shocking, get it off the shelves
Mjb33333333 - 8 months ago
I have no idea why I brought this, normally stick to recognise brands, must have banged my head. Not worth it even if it was free. Don’t waste your money and time.
curry dave - 2 years ago
once I had gotten this product home, opened it, stirred it, I found it was a very dark blue not black !
Anonymous - 2 years ago
Expensive at £10.00 and very poor coverage! Wouldn’t buy it again! Dulux twice as much but twice the product in my view!
Izziwizzy - 2 years ago
Useless stuff. Used whole tin which was roughly 3 coats. Had to cover with dulux.
Does what it says on the tin
katihwb - 2 years ago
I bought this paint to do a couple of door panels and it works great ... while it took two coats to get a full coverage, not much of the paint was used each time (we brushed it on).
It was so easy to clear the brushes afterwards too! No need for thinners etc... just run them under a tap and they're done. Drips on the floor? ~ a single baby wipe removed them from our treated floorboards.