See more Linen Stainless Steel Sinks
Cooke & Lewis Lyell 1 bowl Linen Finish Stainless steel Sink & drainer
Number of bowls
An essential addition to any kitchen, this sink & drainer from Cooke & Lewis's Lyell range is made from sturdy stainless steel. It has 1 bowl, a reversible drainer and 1 tap hole, ready for you to add the taps of your choice.
- Guarantee - 15 years
- Comes with - Sealing strip & fixing clips provided
- Other parts/packs required - Pack A space saver waste, overflow and plumbing kit required, sold separately
Features and Benefits
- Linen Finish Stainless Steel sinks offer all the features of standard stainless steel with the additional benefit of being scratch resistant due to the honeycomb texture.
- Suitable for a minimum base cabinet size of 60 cm
- Other parts/packs required - Pack A waste kit required
|Surface finish||Linen Finish|
|Number of bowls||1 bowl|
|Number of tap holes||1|
|Overflow Included||Overflow not included|
|Other parts/packs required||Pack A waste kit required|
Anonymous - 4 months ago
This sink needs a redesign or removing from sale. It is not 'fit for purpose'.
I bought this because my wife wanted a big bowl area and it looked neat and appropriate for our new kitchen.
However, problem one surfaced when I tried to clamp it in the worktop hole (previously cut ). The clamps are hugely difficult to press into position with mastic covered fingers - there is no sensible purchase. Then, how tight do you do them up? A couple pulled out of their sockets and needed to be undone and re-inserted (again with difficulty and mastic-covered fingers!).
Right, sink in and positioned on the worktop. Problem number two is that the flat areas of the sink (the draining board) are so flimsy that the sink 'boings' every time you put/pick-up something on it - really cheap (great for our new kitchen)! I had to brace it with some wood to stop this.
And finally, number three - the tap hole. This sink is designed for the standard mono-block tap but is so flimsy around the tap hole that every time you try to use the tap the stainless steel of the sink flexes and the tap wobbles about. This is just plain poor design - how long will the tap base stay sealed on the sink?
My strong recommendation is DON'T BUY THIS SINK - unless you don't mind your new kitchen looking cheap and nasty! I cannot imagine that anybody from B&Q put this though any type of product validation.The end result is that we either put up with this rubbish sink or go through pulling it out and buying some better quality - great, thanks B&Q!
This sink is hard work!
EvaM - 5 months ago
Bough this sink a few months ago and regretted it straight away. Cannot leave anything on the draining board to dry as the finish attracts limescale. Once I left the washed up dishes on it overnight just to spend the following morning trying to clean the water marks. Once the are there the do not like to go. I also cannot leave anything to soak in the sink as it will stain it or leave a mark around the sink from the water level. I have rusty looking marks that again will not go due to the texture of the material. I have tried many ways to keep the sink clean (all stainless steel friendly) but failed. On top of that the tap wobbles (from reading other reviews, other customers have the same problem).
I spend time every night wiping it dry and clean. This sink is hard work!!!
A good sink in some respects.
Anonymous - 1 year ago
was stuck for choice because it had to fit where my old one had been, that said,it was easy to fit, instructions good. The finish takes getting used to and not found a way of keeping it looking nice yet, a matt finish, as others have said, it does not drain well on the draining board side, it has a large bowl which is ideal for us. A bit flimsy around the tap hole when you fit a large monobloc tap which tends to wobble a bit.
BOUGHT ONE TODAY BELVERDERE
Anonymous - 2 years ago
FITTING INSTUCTIONS POOR AS NOT CHEAP LIKE THE LEAFLET SAYS CONSULT AN EXPERT SAYS IT ALL NO CLEAR INSTRUCTIONS HOW TO FIT HOLDING CLIPS
Good looking sink
Annie76 - 2 years ago
I bought this sink today loved it as soon as saw it in store bote 1 previously frw months ago hd to return it was short needed 100mm so went b and q saw this 1 bote it straitaway looks fab love the design will mke my kitchen look fab with the wow feature
Customers who bought this also browsed
Cooke & Lewis Bilbrough Brushed nickel effect Kitchen
This brushed nickel effect side lever spring neck and spout tap from Cooke and Lewis' Bilbrough range brings a stylish finishing touch to your kitchen. It's suitable for high and low pressure systems. Guarantee - 10 years Comes with - Comes with 2x 1/2" BSP female flexible braided hose with ...
Cooke & Lewis Flinter Chrome finish Kitchen Side
This chrome finish side lever spring neck tap from Cooke and Lewis' Flinter range brings a stylish finishing touch to your kitchen. It's suitable for high pressure systems. Guarantee - 10 years Comes with - Comes with 2x 1/2" BSP female flexible braided hose with built in pre-filters and fixings ...
Cooke & Lewis Flinter Matt Kitchen Side lever
This matt side lever spring neck tap from Cooke and Lewis' Flinter range brings a stylish finishing touch to your kitchen. It's suitable for high pressure systems. Guarantee - 10 years Comes with - Comes with 2x 1/2" BSP female flexible braided hose with built in pre-filters and fixings and ...
Cooke & Lewis Jonha Chrome finish Kitchen Top
This chrome finish top lever tap from Cooke and Lewis' Jonha range brings a stylish finishing touch to your kitchen. It's suitable for high pressure systems. Guarantee - 10 years Comes with - Comes with 2x 1/2" BSP female flexible braided hose with built in pre-filters and fixings and installation ...