Core Deck Stop Chamfered Treated Decking Balustrade Add On Kit 1800mm

• Guarantee - 1 year
• Fixings sold separately
• Use the universal rail in the following way: Base Rail - Make sure the rail is groove face down. Do not put spindles in the groove, it will collect water and rot over time. Drill pilot holes in the rail and screw up from the bottom of the rail into the end of the spindles. Spindles fit flush to the flat top side of the rail. Handrail - Fit the groove over the top of the spindles. Drill pilot holes through the top of the rail and screw through the rail into the end of the spindles. Capping Rail - Fit the rail over the top of the handrail to cover the screw heads. Screw up from under the handrail into the capping rail to secure. PLEASE NOTE: All softwood timber decking components have been pressure treated with tanlith-e outdoor preservative which turns the timber a slight brown colour. This colour may not be consistent throughout the whole product. This product will need to be treated after installation to gain a consistent colour. All decking products are stored outdoors and may be delivered wet.

Features and benefits

Our pine stop chamfered range is resilient and hard wearing meaning it can take everything nature can throw at it and still look great as the sun goes down.

• Add On Kit contains 1 x Post 13 x Chamfered Spindles 3 x Rails = 1 x Handrail 1 x Capping Rail 1 x Base Rail
• Treated for external use
• Chamfered Decking Spindles 41mm x 41mm x 895mm
• Universal Rails (W) 63mm x (H) 28mm x (L)1800mm
• Treated Posts (H) 1250mm x (W) 82mm x (D) 82mm
• Paint or stain after installation for a consistent colour
• Suitable for domestic decks where you need to achieve 900mm Handrail height
• Timber products can be cut to size during installation