Craig & Rose Artisan Rust Textured effect Matt Topcoat Special effect paint, 2.5L

• Suitable for use on Walls & décor
• Surface Preparation - Remove loose or flaking paint. Fill cracks or holes with a filler and sand smooth. Lightly abrade any silk, satin or glossy painted surfaces before painting over. Clean and dust-off surfaces before painting. Bare or porous surfaces will require sealing with Craig and Rose purpose undercoat.
• Instructions for Use - Apply 2 coats of Craig & Rose Rust Effect with a wide brush using random brush strokes. After 12 hours apply 2 coats of Craig & Rose Artisan Rust Effect Activator over the dry rust effect. If using in a wet room or on an exterior surface, seal with a clear water based varnish. Note the clear coat will change the appearance of the Rust Effect
• Guarantee - Statutory

Features and benefits

Create an industrial look with the Rust Effect system. Rust Effect Step 1 must be used with Craig & Rose Artisan Rust Activator Step 2. The look is perfect for feature walls to make a statement but it can also be used on other surfaces such as garden ornaments and home accessories. This is a two-step system using the Rust Effect and the Rust Activator Solution, and provides an achievable way to create a stylish industrial feel in any home.

• Easy to apply 2-step system
• Creates a luxurious, industrial finish
• Formulated with real iron particles, the rust finish will continue to develop as it ages
• Perfect for indoor or outdoor statement walls, garden ornaments and home accessories
• For additional protection, seal the surface using Craig & Rose Furniture and Effect Wax