See more Ball, Fill & Float Valves
Diall Dual Flush Valve
This plastic dual flush valve is suitable for 2 piece toilets.
- Guarantee - 2 years
- 2 inch cistern
Features and Benefits
- Chromed push button
- Flush valve with cable
- Adjustable flush volume
- Good performance of washing
- Good reliability
|BSP thread size||2 "|
|Ease of application||Easy to assemble|
|WRAS approved||WRAS approved|
Terrible product, steer clear
Bob McN - 3 months ago
Multiple flushes at full flow are required to flush away a few sheets of paper. The buttons are hard to press when connected to the cable.
If you are on a water meter, this product will end up costing you more money than a standard flush.
Puffleorange - 7 months ago
I bought in store so didn’t read the other reviews until after I had taken apart and refitted the wc three times.
Very poor bit of kit that just constantly leaks into the pan really disappointed.
I bought another brand from another shop in the end fitted in five minutes with no problems.
Poor instructions and cant adjust overflow pipe le
Al645465465 - 7 months ago
Tee instructions that came with this are very poor. If you dont already know what you are doing dont buy it. The other issue I have is the overflow pipe is not adjustable, something I have never seen before. It means that you have to adjust the water intake to set the height but the problem is you cant see the height you need until its installed and to adjust it most intakes need the cistern to be disconectted so you have to fit it, test it, take it off, adjust the water intake and then refit it.
Happy chipper - 8 months ago
Purchased a few weeks ago due to the one that was fitted had broken, upon opening the package I was pleasantly surprised at the quality of this item for the price I paid,it was very easy to fit and also easy to adjust the flow on full flush and half flush, the press button was very easy to fit and also was good quality, I can recommend this item for a qualified plumber or a diy enthusiast, which I am. To sum it up easy fit good quality great price, highly recommended. 5* happy buyer
Great value, works well.
NickB73 - 11 months ago
I bought 3 of these to replace the siphons in my cisterns, which despite being only 3 years old where all leaking.
These were easy to fit, but I did find the adjusters for the half and full flush difficult to adjust, but once at the The right setting they can be left alone.
I prefer the button flush connected via the cable vs the other style where the button pushes down on the siphon, this seems more robust and easier to work with.
My only complaint with these, is the rubber seals and gaskets were completely useless, I had to use copious amounts of silicon sealant to get the joints waterproof, and it’s for this reason I have down marked it. If this could be resolved it would be a 5 stat product.
Customers who bought this also browsed
Fluidmaster Bottom Entry 1/2" Fill Valve with Brass
This brass and plastic bottom entry 1/2" fill valve with brass shank is suitable for low or high water pressure. Guarantee - 1 year Adjustment type - Adjustable height
Fluidmaster Bottom Entry 1/2" Quiet Fill Valve
This bottom entry 1/2" quiet fill valve is suitable for high or low water pressure and for use in a cistern with bottom entry fitting. Guarantee - 1 year Adjustment type - Adjustable height
Fluidmaster Dual Flush & Fill Valve Kit
This plastic dual flush and fill valve kit is suitable for top, front or side mounted push buttons and virtually all bottom entry cisterns. Guarantee - 1 year Adjustment type - Adjustable height
Fluidmaster Exposed Cistern (H)340mm (W)500mm (D)155mm
This Fluidmaster plastic exposed cistern comes with flush pipe, part 4 uk ½ inlet valve, plastic freeflo siphon, fittings and pan seal. Guarantee - 3 month Fixings supplied Application - Easy to install