See more Tiling Adhesives
Diall Ready to use Wall tile adhesive & grout, White 300g
Our stores do not stock this product
This wall tile adhesive & grout is waterproof and suitable for glazed ceramic wall tiles.
- For use on - Tiled walls
- Recommended for - Bathrooms and kitchens
- Mould, heat and water resistant
- Suitable for splash areas
Features and benefits
- Anti Mould
- Adhesive & grout
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 hours|
|Coverage||Up to eight 150 x 150 mm tiles|
Kaz40 - 3 months ago
Bought 2 tubes . Expensive and didn’t stick tiles, takes days to dry and then after drying it crumbled .
Very poor product
CiderGuy - 5 months ago
Bought this to do some precision grouting of tightly-spaced tiles, as normal method would be messy. This product, however, would not come out of the tube, despite several attempts to knead it to mix it. So I cut open the tube and saw that the material had blocked the spout as it was too dry, while there was water further down the tube. I ended up mixing it up and proceeding normally. So very disappointed having paid over the odds. (I didn't have time to take it back for a refund.)
As good as more expensive
Navsteve - 3 years ago
Seems to work well as a grouting - don't know how good it is for sticking tiles as only used to replace some missing grouting.
cph2000 - 3 years ago
Three weeks later I can run my finger over the grout and it still lifts.
Easy to use
MKPete2 - 3 years ago
I'm not great at DIY but even I found this easy to use. Recommended!