See more Wall & Ceiling Paint
Dulux Goose down Matt Emulsion Paint 2.5L
This emulsion paint is suitable for and covers up to 13 m² per litre on average.
Features and Benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- Smooth and creamy emulsion paint
- Matt finish for a non-reflective look
- Touch dry in 2 hours, recoatable in 4 hours
- Chromalock technology included
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Litre capacity (L)||2.5L|
|Colour description||Goose down|
|Coverage||Up to 13 m² per litre|
|Drying time||2-4 hours|
|Touch dry time||2 hours|
|Recoat time||2-4 hours|
|Recommended for||Ceilings & walls|
Painter Paul - 6 months ago
We have just painted our new extension in goose down and it looks amazing.
Awful finish leaves air bubbles
MikeP78 - 9 months ago
Despite sugar soaping the walls, undercoating, then sugar soaping again and using new a new roller and brushes Im getting patches of air bubbles. Never had this problem before so I can only assume its the paint as I've throughly prepped everything and properly stirred the paint.
Ghaw - 9 months ago
This grey has a blue tint to it in a darker room and came out darker than anticipated.
Mojo234 - 11 months ago
Wondered about the colour when I started to paint,but just as expected when dry.
Huckle - 11 months ago
Goes on really well and is lovely grey colour not blue looking like some greys.
Customers who bought this also browsed
Dulux Rock salt Matt Emulsion paint 5L
Surface preparation:Remove loose or flaking material before applying any paint. Make sure the surfaces are dry and clean from dirt or grease. Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp ot humid conditions or in extreme temperatures.