• Guarantee - 1 year
• Overheat cut out protection
• Automatic temperature control

Features and benefits

• EFFICIENT FAST ELECTRIC WALL HEATER: The moment you switch on the BFH21 wall heater hot air starts to blow out and warm up the surrounding room. You can choose between using the heater on half power (1000W) or full power (2000W), depending on your preference and how quickly you want the room to heat up. This heater helps you to save energy thanks to its programmable time modes and the open window detection function
• 5 PROGRAMMABLE MODES AND TIMER: Customise the pre-set modes to ensure your bathroom is kept at the temperature you like when you want it. You may only want the heater on in the mornings, or evenings or perhaps even just weekends. Schedule and save up to 5 different modes. The reverse timer function allows the user to set a countdown time for automatic switch off, for instance, set for 2 hours and the heater will emit heat for 2 hours and then switch off
• OPEN WINDOW DETECTION TO SAVE ENERGY: Unique to this model, the BFH21 wall mounted heater has a Window Open Detection feature that detects when either a window or door is open and consequently allowing the heat to dissipate too quickly. IF the heater detects that despite blowing out consistent hot air the room's temperature isn't increasing properly, it will automatically switch off to save itself power and from overworking
• MADE ESPECIALLY FOR BATHROOMS: Rated IP24, this heater is waterproof and splashproof so it is ideal for bathrooms and similar environments. Please note that we recommend that this heater is installed at a height no lower than 120cm from the floor for safety purposes
• FEATURES AND SPECIFICATIONS: Downflow fan heater. Wall mountable design. Colour: white. Power: max 2000W. Two power modes (1000w/2000w). Reverse Timer Function. Open Window Detection. 5 Customisable Program Modes. Anti-Frost Protection. Child Lock. Area coverage: 20m2. Rated IP24. ERP LOT 20 Compliant. BTU: 6200. Cable length: 150cm. Fitted with BS British Standard 3-pin plug. Battery required for remote control CR2022