EHC Slim Jim 12kW and Indirect Pre-Plumbed Electric Boiler 180L

The Electric Heating Company recognise that “Time is Money" and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.

The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

100% efficient

Virtually silent in operation

Suitable for central heating only or central heating & hot water

Suitable for underfloor heating

No Mandatory Maintenance required

Space Saving Minimalistic Design

2 years Parts & Labour Guarantee

Option of Volt-Free or 230V Control Connections

6 Stage Heating

Easy-Fit Connectors & Sensors

In-Built Fault Finding Diagnostics

High Current Thermal Cut-Out

Water Level Sensor

Insulated Stainless Steel Heat Exchanger