• Step 1: Remove the dirty filter from your spa, whirlpool or hot tub according to the instructions in the manufacturer's manual. Step 2: Place the filter in the Estelle. Connect the device to the water supply and open the tap. The first part of the filter cleaning process begins, completely automatically, and by water pressure alone. Step 3: After the first part of the cleaning process is complete, turn the switch to allow the second part of the cleaning process to begin. Step 4: Depending on the size of the filter to be cleaned, the entire process only takes about 1 minute. Place the clean filter back in your spa, whirlpool or hot tub and empty the Estelle.

Features and benefits

• The Estelle is suitable for all fin filters with the following dimensions:
• Maximum height 300 mm if the filter is only open at the bottom
• Maximum height - 360 mm when the filter is open on both the top and the bottom
• Outer diameter (outer fins) - 100 - 250 mm
• Inside diameter of the filter: 30 to 80 mm
• Easy to use without detergent (water pressure and centrifugal).
• Cleans without splashing. Suitable for garage and cellar.