See more Frost & water proofers
Everbuild 402 Brick Stone Patio Cement Concrete Water Seal Protector 5L WAT5
Sold & shipped by PERFECT2TRADE LTD
Available online only and not stocked in B&Q stores
Product details
Product information
Waterseal is a high-performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebbledash and rendering.
USES
As an effective water repellent on:
Brick
Stone
Render
Concrete
Pebble dashing
CHARACTERISTICS / ADVANTAGES
Improved durability and beading effect.
Solvent free formula.
Non-flammable.
May be applied by conventional garden spray.
May be applied to damp surfaces.
Active Components Emulsified polysiloxane
(silicone) resin in water
Coverage 5 � 8 m� / litre depending
on porosity and nature of
surfaces being treated.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PRE-TREATMENT
All surfaces must be clean and sound, free from dirt,
mould, algae, grease and other contamination. Surfaces may be damp not wet. Carry out surface repairs
and fill cracks before application
APPLICATION
Shake well before use. EVERBUILD� 402 WaterSeal
may be applied to dry or damp (not wet) surfaces. Apply by low pressure (garden) spray, brush or roller.
NOTE: THIS PRODUCT WILL DRY CLEAR.
On vertical surfaces, saturate the wall working from
the bottom up, ensuring the entire surface is covered.
On horizontal surfaces, flood the entire area then after
10 minutes, spread out with a soft brush, roller or mop
to ensure the entire area is covered.
Two coats are normally required; the second coat being applied within 1 hour � as soon as the first coat has
soaked in and whilst the surface is still wet. Clean
brushes, rollers and spray equipment with warm water IMMEDIATELY after use.
LIMITATIONS
Do not apply below 10oC.
Do not apply when raining or when rain is imminent.
Do not use on painted surfaces.
Allowing the first coat to dry may prevent penetration of the second coat. Always apply second coat
within 1 hour, or before first coat is dry.
Do not use on wood, plastic or rubber.
Do not use in fishponds.
Do not use detergents to clean the substrate prior
- Guarantee - Statutory
Features and benefits
PRODUCT INFORMATION Packaging 5L Jerry Can Appearance / Colour Milky White � Dries Clear Shelf Life 12 months from date of manufacture. Note that the product towards the end of this period may separate into white and clear layers. Simply shake well before applying to reconstitute. This is an aesthetic and will not affect the performance of the product. Storage Conditions Store in dry conditions between 5 and 30�C, protect from frost.
- PRODUCT INFORMATION
- Packaging 5L Jerry Can
- Appearance / Colour Milky White � Dries Clear
- Shelf Life 12 months from date of manufacture.
- Note that the product towards the end of this period may separate into white and clear layers.
Specifications
| Location | Interior & exterior |
|---|---|
| Product weight | 1g |
| Product code | 5029347004255 |