10% off everything exclusively for B&Q Club members ends midnight, just enter your card number for discount | Not a member? Join now to receive your discount

See more Toilet repair & fittings

Home

Right chevron

Plumbing

Right chevron

Fluidmaster Brass & plastic Side entry Fill valve, ½"

Zoom inZoom outZoom reset
Fluidmaster Brass & plastic Side entry Fill valve, ½"
£15
Loading
Checking availability...
Loading
Checking availability...

Product details

Product information

  • Manufacturer guarantee - 5 years
  • Comes with Instruction manual
  • Turn off water supply. Disconnect pipe work and remove old valve. Place inner washer onto threaded shank then install new valve through cistern or tank hole. Place outer washer onto shank outside cistern or tank then thread back nut onto threaded shank to enable tap connector to fit neatly to avoid cross threading. When position is correct, before tightening back nut, reconnect water supply to valve, making sure washer is seated correctly. Tighten tap connector 1/4 turn past hand tight with spanner (do not over tighten). Now tighten back nut with spanner 1/4 turn past hand tight (do not over tighten). Turn on water supply. Adjust float until water level is as marked on inside of cistern or tank. If overflow pipe is at same level as supply line, adjust water level to approximately 25mm (1 inch) below overflow pipe. Turn float adjustment rod clockwise to raise and anti-clockwise to lower water level. Turn on water supply.
  • Fittings & fixings included

Features and benefits

This side entry 1/2" fill valve is suitable for use with close coupled toilets. It has a high quality brass thread and silent fill technology

  • Silent fill - Ends noisy cistern refills, helping to keep disturbance to a minimum for all the family both day and night
  • Adjustable - Has an adjustable height for easy fit across of different cistern sizes
  • Brass thread - High quality material that reduces the risk of cross threading and damage to the valve
  • Tested to 200000 cycles - To ensure the durability and quality of the valve
  • Suitable for use with both high and low pressure systems - Giving confidence that this is the right product for any type of system
  • (Water supply certification) WRAS certified - Fully complies with all local market regulatory standards, ensuring the quality of the product

Specifications

BrandFluidmaster
Pack quantity1
Inlet positionSide
MaterialBrass & plastic
Minimum operating pressure0.1bar
Model name/number49088-0001
Product depth135mm
Product height220mm
Product weight230g
Product width55mm
Suitable water pressureHigh or low pressure
Connection size (imperial)0.5"
StandardBS 1212
Water regulationsWRAS approved
Product code5060157590637