A traditional, easy to dose chlorine granule, Little effect on pH, Rapid dissolving More info:Gold Horizons Spa Stabilised Chlorine Granules Key Features/Characteristics Granular Little effect on pH Ideal Free Chlorine Range: 3 – 5mg/l These stabilised chlorine granules are ideal for daily dosing of your spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH. Application Instructions 1. Maintain pH level within the ideal range of 7.2 – 7.6. If the not in this range, adjust. 2. Maintain free chlorine residuals for spas within the range 3 – 5mg/l (ppm. *Freshly filled new spas or spas left drained for a period of time require an initial start-up dose of 50mg/l (ppm) of free chlorine circulated for a minimum of 1 hour. This product may be applied directly to spas where temperatures exceed 20oC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) of clean warm water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned ‘on’. 3. Repeat dose application if necessary to achieve levels in point 2 above. 4. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa with Gold Horizons Spa Revive to eliminate any excess contamination. Daily Dose Rates Water Volumes To increase Chlorine Level Litres Gallons 1mg/l 3mg/l 1,000 220 2g 6g 1,500 330 3g 9g - 95 -