See more Blow Torches, Soldering Irons & Solder
GoSystem Power torch
Fix and weld your metalwork with this GoSystem cordless power torch. Suitable for plumbing, brazing, automotive. It can reach a temperature of 1610°C.
- Guarantee - 1 year
Features and Benefits
|Maximum temperature range||1610°C|
Snapper 2 - 3 months ago
2nd one I've bought, the first one the gas seal between the bottle and the torch went, couldn't get a replacement seal anywhere so that one got thrown away as it was about 4 months outside of the warranty.
The one in my hand now is about 5 months old and the ignitor has failed. Cant find the receipt unless I can persuade them to change it (which I doubt) this will probably end up in the bin as well. And to add insult to injury I don't think it's been used more than about ten times, I've not even changed the cylinder on it yet!
They appear to be cheap (?) poorly made copies of the Rothenberger torch. I will NOT be buying another one.
Beadle fitter - 1 year ago
I bought this to save carrying oxy / actelene with me to heat bolt etc to free them off when rusted an seized. Works well and has done all asked of it so far.
Ohjeez - 2 years ago
I was using the torch gas ran out so I swapped the bottle and gas escaped from everywhere I tried a different bottle but got same result . It was over a year old so nobody was interested in the fault . I'm not impressed with the total lack of reliability , I didn't use the torch extensively only on home project and didn't abuse the torch either never , never again.
Bought for plumbing work
Nick 49 - 2 years ago
I bought this 14 months ago & used it about six times went to use it to warm up some flashband & the small metal insert in barrel fell out & the gun wouldn' T work any more. Took it back to supplier they didn't want to know as only 12 months guarantee on it. I wouldn't buy another.
(No title submitted)
calog - 5 years ago
Customers who bought this also browsed
Dremel Blow Torch
Fix and weld your metalwork with this Dremel cordless blow torch. It can reach a temperature of 1200°C. Guarantee - 2 years Accessories included - 1x flame extension piece, 1x deflector, 1x soldering, 1x catalyst, 1x soldering tin with blue cap, 1x soldering sponge and 1x sponge box
Dremel Gas Torch
This Dremel gas torch can be used as a to heat and apply solder and comes with 1x soldering tip, 1x cutting knife, 1x hot knife, 1x flat wide flame head, 1x reflector, 1x hot blower head, 1x soldering tin with blue cap, 1x soldering sponge and sponge box and ...
Gosystem 190G Gas Cartridge
This 190g gas cartridge from GoSystem is to be used with blowlamps . It works from a minimum temperature of -10°C. Guarantee - 3 years Fitting: International type 200, 190g pireceable butane-propane mix gas cartridge
Gosystem 400G Gas Cylinder Cylinder
This 400g gas cylinder from GoSystem is to be used with blowlamps around the external of your home. It works from a minimum temperature of -20°C. Guarantee - 1 year Fitting: Uses standard CGA600 connection