See more Fillers
Gyproc Easi-Fill 60 Two-Coat Filler & Jointing Compound 5kg
Product Details
Product Information
- A combined setting and air-drying, gypsum based material for both bulk filling and finishing of joints. High coverage rates and minimal drying shrinkage allows application in 2 coats.
- Apply by hand, 60 minute working time
Features and Benefits
Combined setting and air-drying gypsum based material for both bulk filling and finishing. Ideal for repairs, chasing in and patching. This product has a working time of just 60 minutes and any second coat can be applied in 140 minutes. High coverage rate and minimal drying shrinkage allows easy application and sanding
- Two-coat filler and finishing jointing compound for drywal systems
- Easy to mix, apply and sand
- superb coverage
- Minimal shrinkage - requires fewer coats, saving time and money
- ideal for fixing cove
- Apply by hand, 60 minute working time
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Technical Specifications
Brand | Gyproc |
---|---|
Weight (kg) | 5kg |
Setting time | 60 minutes |
Suitable for | Interior use only |
Colour | Dries white |
Standard | EN13963:2005 |
Product code | 5015892846945 |
Reviews
easy to use
xxpixiexx - 9 months ago
I bought this to repair a ceiling it was perfect for the job
Great stuff
Long shanks 123 - 9 months ago
This filler is excellent for deep and shallow holes.
It’s easy to mix and when dry it's easy to sand down.
Great stuff.
Soo easy to use and sand
Sjs1988 - 1 year ago
Bought recently to finish edge to plasterboard and few minor repairs.
Very easy to mix and use, takes a good time to set meaning you can work with it for longer. Easy to sand and paints very well.
Best filler/plaster repair I have ever used.
Anonymous - 1 year ago
Strongly recommended by Chris at local store and used it to repair some big holes/cracks at daughter's house. So easy to apply and then sand down afterwards - even very large areas.
Great features
Iosif - 1 year ago
I used these products and I'm very happy with them
Related searches
Related products
Make Good Plasterboard Jointing, filling & finishing compound
Open the lid of the ready-mixed compound. Apply with a trowel or filling knife on walls and ceilings. Wait between 2-4 hours to dry, dependant on environmental conditions and thickness applied, sand out any defects and reapply second coat if necessary
Make Good Plasterboard Jointing, filling & finishing powder
Before using the product, mix it with water. Mix 10kg of powder with 6.5L water. Apply with a trowel or filling knife on walls and ceilings
Make Good Plasterboard Jointing, filling & finishing powder
Apply it with a trowel or filling knife and apply a second coat in 140 to 180 minutes
Polycell All purpose powder filler 2kg
Suitable for filling and repairing joints, cracks and holes Can be used on most building materials Apply with a filling knife or spreader No shrinking or cracking Sandable