HG Natural Stone Protector 1 Litre Product 33

• Guarantee - Statutory
• Use on Natural Stone
• Instructions for Use - Prior to applying HG Natural Stone Protector the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Natural Stone Cement Grout Film Remover. Allow the floor to dry for 3 days, in case of floor heating, 24 hours. Underfloor heating should be switched off 12 hours before treatment with HG Natural Stone Protector. Apply by hand: Dilute HG Natural Stone Protector with equal part of clean water. Apply HG Marble and Natural Stone Protective Coating Gloss Finish with a wax applicator or Non-Fluffy Cloth., spread thin and evenly in one direction, and allow to dry for 45 minutes, before applying a second coat at right angles from the first coat. It is possible to walk over the protection after 3 hours. The layer has completely cured after 3 days. Do NOT rub or buff, but leave to dry naturally. Apply by polishing machine: Dilute HG Natural Stone Protector with equal part of clean water. Spray dilution on no more than 25 sq/ft of surface and polish with machine fitted with felt or white synthetic pad, and polish at 300 rpm. For regular maintenance use HG Natural Stone Cleaner Shine Restorer. To strip old coats of Natural Stone Protector use HG Natural Stone Cleaner Extra Stong.
• Guarantee - Statutory

Features and benefits

HG Natural Stone Protector provides a thin self-shining protective coating on marble floors and other natural stone.

• Provides a thin self-shining coating which protects the surfaces from dirt
• Deepens the colour and veining on marbles and other natural stones
• Prevents stains, scratching and stubborn dirt