HG Terracotta Protector (Product 84) 1 Litre

• Guarantee - Statutory
• Use on Terracotta flooring
• Instructions for Use - If the floor is porous this will need to be treated with HG Impregnating Protector to reduce its porosity and to ensure a good base to sustain the HG Terracotta Protector. Apply HG Terracotta Protector only on clean, dry floors. If necessary clean off any grout film from new floors with HG Extra or HG Limex. Any underfloor heating should be switched off. Use HG Terracotta Protector neat. Do not pour directly onto the floor. Apply HG Terracotta Protector with either a Non-Fluffy Cloth (perhaps wrapped around a floor mop), a Mohair Paint Roller. (not foam or wool) or with a wax-applicator moistened with HG Terracotta Protector. Apply thinly and evenly in one direction. Several thinly applied coats are better than one thick coat. Allow HG Terracotta Protector to dry for at least 45 minutes before applying the next coat to achieve a smooth shining finish over the whole floor. The floor can be walked on after approximately 3 hours. After 3 days HG Terracotta Protector is completely hardened. The stain resistance of the floor can also be increased by applying additional coats of HG Terracotta Cleaner Shine Restorer. Maintenance: For regular maintenance cleaning of the treated floor use HG Terracotta Cleaner Shine Restorer which both cleans and extends the life of the finish. Old worn coatings can be removed when finally necessary with HG Terracotta Cleaner Extra Strong without stripping the HG Impregnator underneath. Clean tools afterwards with water.
• Guarantee - Statutory

Features and benefits

HG Terracotta Protector (Product 84) HG Terracotta Protector is an alternative to HG Terracotta Wax which gives Terracotta tiles a shining finish and protects the floor against the deep penetration of dirt and stains.

• Durable
• Easy to maintain
• Impervious to most household chemicals