HG Tile Protector (Product 14) 1 Litre

• Guarantee - Statutory
• Use on all types of floor tiles (including unglazed quarry tiles and victorian tiles), flagstones and slate.
• Instructions for Use - 1. Prior to applying HG Tile Protector the floor must be completely clean and free of grease and dust. After wet cleaning, the floor should be left to dry thoroughly for 3 days. With floor heating 24 hours. Turn off your floor heating 12 hours before treatment. 2. On new floors the glue/cement and grouting must be completely hardened and dry. The drying time is usually 4-6 weeks. 3. Existing porous surfaces such as slate, brick or flagstones first use HG Tile Impregnating Protector (HG Product 13) . 4. To avoid foam, do not stir or shake the bottle before use. HG Protective Coating Satin Finish should be applied with a wax applicator or a Non-Fluffy Cloth wrapped around a Floor Wiper. On rough surfaces, use a Mohair Paint Roller. 5. Pour some HG Protective Coating Satin Finish onto the floor and spread it in straight tracks in one direction. Do not rub or buff. 6. Once dried after approx. 40 minutes a second coat should be applied at right angles to the first. 7. The floor can be walked on about 3 hours after the final treatment but allow three days to become fully hardened and water resistant.
• Guarantee - Statutory

Features and benefits

HG Tile Protector Product 14 is an easily applicable liquid polymer emulsion for all types of floor tiles (including unglazed quarry tiles and victorian tiles), flagstones and slate.

• Protects tiles against stains, dirt, scratches and wear
• Enhances the colour and structure of the tile
• Gives an anti-skid effect
• Suitable for unglazed quarry tiles and victorian tiles, flagstones and slate
• Coverage: 40 m² per litre per layer . Two coats (recommended) 20 m² per litre