See more Paint stripper
Home Strip Paint stripper, 0.5L
This paint stripper removes paint & varnish. It's suitable For wood, metal, stone, brick, plaster, GRP & UPVC. An ideal solution for your DIY projects.
- For removal of paint or varnish
- Suitable for use on Brick, glass reinforced polyester (GRP), metal, plaster, stone, uPVC & wood
Features and benefits
- Safe for use around children and pets
- 500ml will cover 2-3m square depending on thickness of application
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Litre capacity (ml)||500ml|
|Location||Interior & exterior|
Toast82 - 3 days ago
Bought some to strip paint from alloys ... first application was mediocre, stripped some of the clearcoat and paint.
Left it on as suggested for an afternoon and covered with clingfilm. Worst advice ever ... came back to find the clingfilm stuck to the alloys so I now have to remove paint and a layer of plastic!
Solvents are a good thing, this is not
acesoyster - 4 days ago
Paint stripping is always a terrible job, and no product has ever made it easy. Regularly however, do products do a better job than this. Much more expensive than its solvent-based competitors and woefully inadequate. Unless you have an exceptionally good reason you can't used a solvent-based product, save yourself hours of time and look elsewhere.
Absolutely awful product
Gemstar79 - 2 months ago
Definitely doesn’t remove varnish. Wasted a whole day painting on the product, unable to remove hardly any paint of my wall. Wasted money buying the the product and have wasted a day trying to remove 2 coats of paint from my wall. I have also
wasted my energy doing so. Would not recommend this product to anyone
Other products are better
MrsNEC - 8 months ago
I was using Nitromors and read the reviews on this so thought I'd try it. I was stripping a front door with several layers of paint.
It was awful, didn't lift the paint as well as Nitromors, it was really messy and used up really quickly and you have to wait longer between coats. Nitromors was way better for what I was using it for and its cheaper. It's not a quick job, you need time and patience and more product than you might think!
Works, sort of
Billy_123 - 9 months ago
I used this to strip emusion from concreat. I had very low expecxtaions of it as most of these products rerely do what they say on the tin - I applied, covered with clingfilm and left it for 24 hours to work. Have to say whilst it hasn't striped it completely in one go a second application will see the job done with a lot more scraping. So better than expected