See more Band saws
Lumberjack 14" Floor standing Professional Bandsaw with 1100W Induction Motor
Sold & shipped by Lumberjack Tools
Available online only and not stocked in B&Q stores
Product details
Product information
The Lumberjack BS340 floorstanding woodworking bandsaw has a cutting capacity of 230mm (9"), to satisfy professional workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The Lumberjack BS340 has three bearings on the blade guard. Two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.
- Comes with 1x Floor stand, 1x Rip fence, 1x Mitre Fence , 1x LED Work Light, 1 x Blade 13mm 4TPI, 1x Circle Cutter Attachment, 1x Instruction ManualGuarantee - 1 year
- Includes - 1x Floor stand, 1x Rip fence, 1x Mitre Fence , 1x LED Work Light, 1 x Blade 13mm 4TPI, 1x Circle Cutter Attachment, 1x Instruction Manual
- Corded
Features and benefits
The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit.
The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.
- Powerful 1100W motor
- 9'' cutting depth capacity
- Precision ground cast iron work table
- Quick action locking on rip fence
- Crosscutting mitre guide included
- Quiet induction motor
- Mains powered LED work light
- Integral dust collection tray
Specifications
| Brake type | Motor |
|---|---|
| Brand | Lumberjack Tools |
| Depth (cm) | 72cm |
| Height (cm) | 172cm |
| Maximum blade length | 2560mm |
| Maximum blade speed | 800 m/min |
| Maximum cutting height | 225mm |
| Maximum cutting width | 340mm |
| Maximum table tilt | 45° |
| Model name/number | BS340 |
| Motor type | Replaceable carbon brushed |
| No load speed | 1725 rpm |
| Pack quantity | 1 |
| Soft start | Hard start |
| Table adjustment type | Rack & pinion tilt |
| Table material | Aluminium |
| Tool weight (corded) | 75kg |
| Wattage | 1100W |
| Width (cm) | 90cm |
| Product code | 5060429095815 |