Orac Decor PX120F Flexible Moulding 4 Pack

The PX120F is a chunky Flexible 40mm high x 20mm wide panel mould, which is ideal in larger rooms than our similar PX103 panel moulding. You may wish to add the PX120A corner elements where this moulding is being used to create wall panels. Each PX120 is produced in a white primer which can be decorated in any colour Orac panel mouldings are made from durable man-made materials and suitable for exterior use. Customers use the PX120 to create detailing around window frames and walls. The symmetrical PX120 moulding is easy to apply using our FDP700. Remember to use a single coat of exterior grade paint once installed. Orac Axxent dado rails are used throughout Europe. Use the symmetrical PX.120 to refurbish your home if you are looking to create a traditional style, but without the hassle of painting each profile two or three times. The lightweight Duropolymer material should adhere to your wall with minimal support from panel pins, and be ready to accept one finishing coat of paint within six hours in most centrally heated rooms. If you are new to these products you'll appreciate the installation guide we send with each consignment, and the fact that just one coat of paint is required. Any cutting or finishing is the work of a moment, and you can use a fine or medium sand paper if you your initial saw cut is slightly off centre Length: 200cm Height: 4cm Width: 1.9cm