Package Deal: Charnwood W316 Morticer & 4 Piece Chisel Set

Package deal consists of: W316 5/8" Bench Top Morticer & MCCSET4 Chisel Set, which contains 1/4", 3/8", 1/2" and 5/8" Hollow Chisel & Bits

Bench top hollow chisel morticer with an accurate sliding table system.

Using Cast Iron throughout gives the strength and rigidity to this mortiser, to allow timbers of up to 125mm deep and 145mm high to be clamped securely.

There are then two separate controls for moving the table. Pulling the main handle lowers the chisel and begins the cut. Once the first square has been cut, the chisel is withdrawn, and the table moved over to begin the next square. Once the complete length of the mortice has been cut, the table can then be wound backwards as required to create a wider mortice.

The motor has been specially produced to run at a lower rpm than standard motors, which gives a better cut, with less chance of burning. This method of working is much more accurate, faster to achieve results and a great deal easier than using the traditional style of morticer with a fixed bed.

Charnwood W316 Specification

From Chisel Bush to Table 220mm

Maximum timber height with a 1/2″ Chisel Fitted 110mm

Timber Clamping width 25mm (1″) to 100mm (4”)

Chisel capacity 1/4″ to 5/8″

Vertical Chisel Stroke 105mm (4”)

Accepts chisel shank size 3/4″

Table travel (left to right) 170mm (6.5”)

Table travel (front to back) 75mm (3”)

Motor (induction) 370w (1/2hp), 240v

Motor Speed 1400rpm

Dimensions (WxDxH) 520mm x 550mm x 790mm

Weight 42kg

Assembly Time Required 5 Minutes

Rating Hobby

Product Warranty 5 Years